Digital hardness tester is designed to determine hardness of soft material as rubber,
neoprene, silicon, vinyl etc. A spring loaded probe is hold against the specimen and the
Shore A value shows on the display. The specimen surface should be flat and the instrument foot parallel to the specimen. The measurement area must have at least 12 mm
diameter and distance to any edge at least 12 mm. Calibration can be made against
attached test block. Average value can be given from 2-9 measurements.
Automatic Off after 1 minute.
The instrument meet standard as DIN 53505, ISO 868, ASTM D 2240. |
